Encyclopedia > Index-matching material

  Article Content

Index-matching material

In telecommunication, an index-matching material is a substance, usually a liquid, cement (adhesive), or gel, which has an index of refraction that closely approximates that of an optical fiber, and is used to reduce Fresnel reflection at the fiber endface. (FAA)

Note 1: An index-matching material may be used in conjunction with pairs of mated connectors, with mechanical splices, or at the ends of fibers.

Note 2: Without the use of an index-matching material, Fresnel reflections will occur at the smooth endfaces of a fiber. These reflections may be as high as -14 dB (i.e., 14 dB below the level of the incident signal). When the reflected signal returns to the transmitting end, it is reflected again and returns to the receiving end at a level that is (28 plus twice the fiber loss) dB below the direct signal. The reflected signal will also be delayed by twice the delay time introduced by the fiber. The reflected signal will have no practical effect on digital systems because of its low level relative to the direct signal; i.e. , it will have no practical effect on the detected signal seen at the decision point of the digital optical receiver[?]. It may be noticeable in an analog baseband intensity-modulated video signal.

Source: from Federal Standard 1037C



All Wikipedia text is available under the terms of the GNU Free Documentation License

 
  Search Encyclopedia

Search over one million articles, find something about almost anything!
 
 
  
  Featured Article
Lake Ronkonkoma, New York

... in the town. The population density is 1,549.2/km² (4,010.1/mi²). There are 6,949 housing units at an average density of 546.4/km² (1,414.4/mi²). The ...

 
 
 
This page was created in 35.8 ms