Encyclopedia > Digital

  Article Content


The property of dealing with the discrete values rather than a continuous spectrum of values: compare analog or analogue. The word comes from the same source as the word digit: the latin word for finger (counting on the fingers) as these are used for discrete counting.

The distinction digital versus analogue can refer to data storage and transfer, the internal working of an instrument, and the kind of display.

The word "digital" is commonly used in computing.

Table of contents

Digital vs Analogue

Digital Noise

When data is transmitted using analogue methods, a certain amount of noise enters into the signal. This can be have a myriad of different causes: data transmitted via radio may get a poor reception, have interference from other radio sources, or pick up background radio noise from the rest of the universe. Electric pulses being sent down wires are impeded by the resistance of the wire, and heat variations can increase or reduce these resistances. Whilst digitally transmissions are also degregated, any slight variations can be safely ignored. Any variance could provide a great amount of distortion in an analogue signal. In a digital signal, these variances can be overcome, as any signal close to a particular value will be interpreted as that value.

Ease of Reading

For human readable information, both digital and analogue display methods can be useful. Should an instant impression be required, analogue meters often give information quickly. Many people glance quickly at their watch and know roughly what the time is. A needle just touching onto the bottom of an orange shaded area is much different to a needle almost touching into the red area, but an indicator lamp would just glow orange. When accuracy is required, however, digital displays are preferred. Reading analogue meters requires time and a little bit of skill, whereas writing down the value on a digital display is merely a case of copying down the numbers. In cases where both accuracy and quick reckoning are both required, dual displays are often used.

Systematic Loss of Data

When an analogue source needs to be converted into a digital signal for processing by other digital systems, some data may be lost. The Analogue to Digital converter only has a certain resolution: whereas the human eye may be able to detect millions of different shades of pure green, the CCD in a digital camera may only be capable of 256, and at a resolution of a megapixel or so. Whilst this information will be preserved in future transmission, the data has been lost. It should be noted that photographic film is not perfect, and aberrations will appear in this.

See Also

All Wikipedia text is available under the terms of the GNU Free Documentation License

  Search Encyclopedia

Search over one million articles, find something about almost anything!
  Featured Article
Islandia, New York

... at 40°48'17" North, 73°10'22" West (40.804658, -73.172778)1. According to the United States Census Bureau, the village has a total area of 5.8 km² (2.2 ...

This page was created in 38.5 ms