The processor was based on a scaled-down version of the "M1" core used in the Cyrix 6x86, which provided 80% of the performance for a 50% decrease in transistors over the 6x86 design. It had the 32-bit memory bus of an ordinary 486 processor, but internally had much more in common with fifth-generation processors such as the 6x86, the K5, and the Intel Pentium, and even the Intel Pentium Pro. The chip featured near-complete support for i486 instructions, and very limited support for Pentium instructions. Interestingly, some performance-enhancing features of the cpu were intentionally disabled due to potentionally stability-threatening bugs which were not fixed before release time (these features can be enabled with freely-downloadable software utilities; see below).
The similarly-named IBM 5x86 was a licenced rebranding of the Cyrix design (IBM physically produced Cyrix's CPUs for them), marketed separately but identical for practical purposes, apart from the availability of a 75mhz edition which Cyrix did not bring to market, and slight differences in voltage requirements. The Cyrix/IBM 5x86, however, should not be confused with the similarly-named AMD Am5x86 which was essentially a fast 486 (not an all-new design like the Cyrix part) but which had broadly similar performance, used the same Socket 3, and was introduced at the end of the same year.
100mhz (http://www.cpushack.net/chippics/Cyrix5x86-100GP-HS.jpg) capable edition for 25MHz (25x4), 33MHz (33x3), and 50MHz (50x2) front side bus
120/133mhz (http://www.cpushack.net/chippics/Cyrix5x86-120GP.jpg) capable edition for 40mhz (40x3) and 33mhz (33x4) front side bus. The 133 MHz version is very rare, however.
Search Encyclopedia
|
Featured Article
|