Encyclopedia > Bolt

  Article Content

Screw

Redirected from Bolt

A screw is a type of threaded fastener, a device used to hold objects together. It consists of a shaft, which may be cylindrical or conical, and a head. The shaft has a helical ridge formed on it that assists in fixing the screw and stops it from falling out. The head is used to grip the screw when driving it in, and stops the screw from passing right through the material being fastened.

Screws are more versatile than nails: they can be taken out and replaced. Nails usually hold only by friction.

A screw that is tightened by turning it clockwise is said to have a right-hand thread. Screws with left-hand threads are used in exceptional cases, when the screw is subject to anticlockwise forces that might undo a right-hand thread.

Table of contents

Bolt

A bolt is a screw that passes right through the workpiece and is fastened by a nut on the other side. This is a very common way of holding together temporary and permanent constructions. It avoids the need for making a threaded hole to fit the screw. An unthreaded hole is known as a clear hole.

A small bolt is called a machine screw.

The thread on a bolt often occupies only part of the shaft, the remainder of the shaft being clear. A bolt whose shaft is threaded along its whole length is called a set screw.

Other Fastening Methods

When screws and bolts cannot be used, riveting[?], welding, soldering, brazing[?] and glueing are all alternatives.

Mechanical Analysis

A screw is a specialized application of the wedge or inclined plane. It contains a wedge, wound around an interior cylinder or shaft, that either fits into a corresponding plane in a nut, or forms a corresponding plane in the wood or metal as it is inserted. The technical analysis (see also statics, dynamics) to determine the pitch, thread shape or cross section, coefficient of friction (static and dynamic), and holding power of the screw is very similar to that performed to predict wedge behavior. Wedges are discussed in the article on simple machines.

Tensile Strength

Screws and bolts are usually in tension when properly fitted. In most applications they are not designed to bear large shear forces. When, for example, two overlapping metal bars joined by a bolt are likely to be pulled apart longitudinally, the bolt must be tight enough that the friction between the two bars can overcome the longitudinal force. If the bars slip then the bolt may be sheared in half, or friction between the bars (called fretting) may weaken them. For this type of application, high-tensile steel bolts are used and these should be tightened with a torque wrench.

High-tensile bolts are usually in the form of hexagonal cap screws with an ISO strength rating stamped on the head. The strength ratings most often used are 8.8 and 12.9. The number before the point is the ultimate tensile strength in N/mm2 (or MPa) divided by 100. This is the stress at which the bolt will fail, i.e. break in half.

The number after the point is the yield strength as a percentage of the ultimate tensile strength, divided by 10. Yield strength is the stress at which the bolt will receive a permanent set (an elongation from which it will not recover when the force is removed) of 0.2%.

Mild steel bolts have a 4.6 rating. High-tensile bolts have an 8.8 rating or above.

Types of Screw

  • Cap screw has a convex head, usually hexagonal, designed to be driven by a spanner or wrench.
  • Wood screw has a tapered shaft allowing it to penetrate undrilled wood.
  • Machine screw has a cylindrical shaft and fits into a nut or a tapped hole, a small bolt.
  • Self-tapping screw has a cylindrical shaft and a sharp thread that cuts its own hole, often used in sheet metal or plastic.
  • Drywall screw is a specialized self-tapping screw with a cylindrical shaft that has proved to have uses far beyond its original application.
  • Set screw has no head, and is designed to be inserted flush with or below the surface of the workpiece.
  • Dowel screw is a wood-screw with two pointed ends and no head, used for making hidden joints between two pieces of wood.

Shapes of Screw Head

  • Pan head: disc with chamfered outer edge.
  • Cheese head: disc with cylindrical outer edge.
  • Countersunk: conical, with flat outer face and tapering inner face allowing it to sink into the material, very common for wood screws.
  • Button or dome head: flat inner face and hemispherical outer face.
  • Mirror screw head: countersunk head with a tapped hole to receive a separate screw-in chrome-plated cover, used for attaching mirrors.

Types of Screw Drive

A variety of tools exist to drive screws into the material to be fixed. The hand-tool used to drive slot-headed and cross-headed screws is called a screwdriver. A power tool that does the same job is a power screwdriver. The hand-tool for driving cap screws and other types is called a spanner (UK usage) or wrench (US usage).

  • Slot head is driven by a flat-bladed screwdriver.
  • Cross-head, or Phillips screw has an X-shaped slot and is driven by a cross-head screwdriver, designed originally for use with mechanical screwing machines, intentionally made so the driver will ride out, or cam out, under strain to prevent over-tightening. The Phillips Screw Company was founded in Oregon in 1933 by Henry Phillips, who bought the design from J. P. Thompson. Phillips was unable to manufacture the design, so he passed the patent to the American Screw Company, who were the first to manufacture it.
  • Pozidriv is patented, similar to cross-head but designed not to slip, or cam-out. It was jointly patented by the Phillips Screw Company and American Screw Company.
  • Hexagonal or hex screw head has a hexagonal hole and is driven by a hexagonal wrench, sometimes called an Allen key, or a power tool with a hexagonal bit.
  • Robertson drive head has a square hole and is driven by a special power-tool bit or screwdriver (this is a low-cost version of the hex head for domestic use).
  • Torx head has a splined socket and receives a driver with a splined shaft.
  • Tamper-proof torx is similar to torx but the drive socket has a projection to prevent a standard torx driver being inserted.
  • Tri-Wing screws are used by Nintendo on its Gameboys. This discourages even minor home repairs to the units.

Screw Measurements

There are many systems for specifying the dimensions of screws, but in Europe the metric system is beginning to displace the alternatives.

Metric Screws

The diameter of a metric screw is usually specified in millimetres (mm) prefixed by the capital letter M, as in "M5" for a 5mm diameter screw. The diameter of a screw is the outer diameter of the thread, which is approximately equal to the diameter of the shaft before a thread was cut in it.

Metric screw threads are available in coarse and fine versions. The coarse thread is by far the more common. Fine metric threads are sometimes found in electronic equipment made in the Far East.

Non-metric Screws

Before the metric system was common, many engineering companies had their own standard screw sizes. The first person to create a standard (in about 1841) was the English engineer Sir Joseph Whitworth. Whitworth screw sizes are still used, but mainly for repairing old machinery. This system had two thread sizes: coarse (BSW) and fine (BSF). The thread angle was 55°.

A later non-metric standard in the UK was the BA system, named after the British Association for Advancement of Science. Screws were described as "2BA", "4BA" etc., the odd numbers being rarely used.

The USA has its own system, usally called SAE, for Society of Automotive Engineers[?]. These screws are sometimes found outside the USA in personal computers based on the IBM PC specification. There must be millions of PCs outside the USA that have metric screws jammed into non-metric holes!

External Links


Modern-day powered ships and boats are nearly always driven by screw propellers, often referred to as the "ship's screws". In the early days of steam power for ships, when both paddle wheels[?] and screws were in use, ships were often characterized by their type of propellers, leading to terms like screw steamer[?] or screw sloop[?].


A screw is slang for a prison officer[?]. Named so because, during the Victorian period, prison inmates were given pointless tasks to perform such as the crank, where an inmate would have to crank a handle round and round, a certain number of times every hour. A prison officer would now and then make it harder by tightening the crank with a screw.


To screw is slang meaning "to have sexual intercourse with".


Also see Archimedes' screw for a type of pump containing a screw as its impeller.



All Wikipedia text is available under the terms of the GNU Free Documentation License

 
  Search Encyclopedia

Search over one million articles, find something about almost anything!
 
 
  
  Featured Article
Elmer Fudd

... A prototypical Bugs Bunny drives Elmer insane. A year later, in Tex Avery's A Wild Hare, Bugs reappears, but this time with carrot, Brooklyn accent, and "What's Up, ...