Encyclopedia > Asynchronous start-stop

  Article Content

Asynchronous start-stop

The asynchronous start-stop format is one common means of encoding characters over a serial link such as RS-232. Asynchronous start-stop uses a "start bit" followed by some number of data bits, possibly a "parity" bit, and one or two "stop bits".

The number of data and formatting bits must be pre-agreed by the communicating parties.

This format is derived directly from the design of the teletypewriter, which was designed this way because the electromechanical technology of its day was not precise enough for synchronous operation: thus the systems needed to be re-synchronized at the start of each character. Having been re-synchronized, the technology of the day was good enough to preserve bit-sync for the remainder of the character. The stop bits gave the system time to recover before the next start bit. Early teletype systems used five data bits, typically with some variant of the Baudot code.

Asynchronous start-stop signalling was widely used for dial-up modem access to time-sharing computers[?] and BBS systems. These systems used either seven or eight data bits.

The most common configuration used was (and still is) "8N1": eight bit characters, with one stop bit and no parity bit. Thus 10 bits are used to send a single character, which has the nice side-effect that dividing the signalling rate by ten results in the overall transmission speed.

The alternative to asynchronous start-stop was the use of synchronous protocols such as HDLC.

Asynchronous start-stop is still used to communicate with modems for many dial-up Internet access applications, using a framing protocol such as PPP to create packets made up out of characters. The performance loss relative to synchronous access is negligibly, as most modern modems will use a private synchronous protocol to send the data between themselves.



All Wikipedia text is available under the terms of the GNU Free Documentation License

 
  Search Encyclopedia

Search over one million articles, find something about almost anything!
 
 
  
  Featured Article
Father Damien

... (see Kalawao County, Hawaii), he contracted the disease, from which he died at the colony. He is the patron of lepers and outcasts, and was recently made the patron of ...

 
 
 
This page was created in 36.6 ms