Yenisey-2

Yenisey-2 was the name designated to the imaging system on Luna 3 and consisted of a dual lens camera, an automatic film processing unit, and a scanner. The lenses on the camera were a 200 mm focal length, f/5.6 aperture objective[?] and a 500 mm, f/9.5 objective. The camera carried 40 frames of temperature- and radiation resistant 35-mm isochrome[?] film. The 200 mm objective could image the full disk of the Moon and the 500 mm could take an image of a region on the surface. The camera was fixed in the spacecraft and pointing was achieved by rotating the craft itself. A photocell was used to detect the Moon and orient the upper end of the spacecraft and cameras towards it. Detection of the Moon signaled the camera cover to open and the photography sequence to start automatically. After photography was complete, the film was moved to an on-board processor where it was developed, fixed, and dried. Commands from Earth were then given and the film was moved to a scanner where a bright spot produced by a cathode ray tube was projected through the film onto a photomultiplier. The spot was scanned across the film and the photomultiplier converted the intensity of the light passing through the film into an electric signal which was transmitted to Earth. A frame could be scanned with a resolution of 1000 lines, the transmission could be done at a slow rate for large distances from Earth and a faster rate at closer range.