Redirected from SHA1
The original specification of the algorithm was published in 1993 as the Secure Hash Standard, FIPS PUB 180. This version is now often referred to as SHA0. It was withdrawn by the NSA shortly after publication and was superseded by the revised version, published in 1995 in FIPS PUB 1801 and commonly referred to as SHA1. This was done, according to the NSA, to correct a flaw in the original algorithm which reduced its cryptographic security. However, the NSA did not provide any further explanation. Much later, at the Crypto conference of 1998, two French researchers, F. Chabaud and A. Joux, presented an attack on SHA0. Their attack did not work on SHA1. This might, or might not, be the flaw discovered by the NSA. SHA1 has been very closely examined by the public cryptographic community and no cryptographic insecurities have yet been found. It is therefore considered to be quite secure.
The NIST has published three additional variants of SHA, each with longer digests. These are named after their digest lengths (in bits): SHA256, SHA384, and SHA512. They were first published in 2001 in the draft FIPS PUB 1802, at which time review and comment were accepted. FIPS PUB 1802, which also includes SHA1, was released as an official standard in 2002. These new hash functions have not yet received as much scrutiny by the public cryptographic community as SHA1 has, and so their cryptographic security is not yet as assured.
SHA1, SHA256, SHA384, and SHA512 are the required secure hash algorithms for use in U.S. Federal applications, including use by other cryptographic algorithms and protocols, for the protection of sensitive unclassified information. FIPS PUB 1801 also encouraged adoption and use of SHA1 by private and commercial organizations.
A prime motivation for the publication of the Secure Hash Algorithm was the Digital Signature Standard, in which it is incorporated.
Pseudocode for the SHA1 algorithm follows:
(Initialize variables:) a = h0 = 0x67452301 b = h1 = 0xEFCDAB89 c = h2 = 0x98BADCFE d = h3 = 0x10325476 e = h4 = 0xC3D2E1F0 (Preprocessing:) paddedmessage = (message) append 1 while length(paddedmessage) < 512n  64: paddedmessage = paddedmessage append 0 paddedmessage = paddedmessage append (length(message) in 64bit format) (Process the message in successive 512bit chunks:) while 512bit chunk(s) remain(s): break the current chunk into sixteen 32bit words w(i), 0 <= i <= 15 (Extend the sixteeen 32bit words into eighty 32bit words:) for i from 16 to 79: w(i) = (w(i3) xor w(i8) xor w(i14) xor w(i16)) leftrotate 1 (Main loop:) for i from 0 to 79: temp = (a leftrotate 5) + f(b,c,d) + e + k + w(i) (note: all addition is mod 2^32) where: (0 <= i <= 19): f(b,c,d) = (b and c) or ((not b) and d), k = 0x5A827999 (20 <= i <= 39): f(b,c,d) = (b xor c xor d), k = 0x6ED9EBA1 (40 <= i <= 59): f(b,c,d) = (b and c) or (b and d) or (c and d), k = 0x8F1BBCDC (60 <= i <= 79): f(b,c,d) = (b xor c xor d), k = 0xCA62C1D6 e = d d = c c = b leftrotate 30 b = a a = temp h0 = h0 + a h1 = h1 + b h2 = h2 + c h3 = h3 + d h4 = h4 + e digest = hash = h0 append h1 append h2 append h3 append h4
Note: Instead of the formulation from FIPS PUB 1801 shown, the following may be used for improved efficiency:
(0 <= i <= 19): f(b,c,d) = (d xor (b and (c xor d))) (40 <= i <= 59): f(b,c,d) = (b and c) or (d and (b or c)))
See also: RIPEMD160, MD5.
Search Encyclopedia

Featured Article
