Terrestrial time signals Radio clocks synchronized to terrestrial time signals can usually achieve an accuracy of around 1 millisecond relative to the time standard, generally limited by uncertainties and variability in radio propagation[?].
Time signals that can be used as references for radio clocks include:
Time signal radio stations in general have the following attributes:
Loran-C time signals may also be used for radio clock synchronization, by augmenting their highly accurate frequency transmissions with external measurements of the offsets of LORAN navigation signals against time standards.
GPS clocks Many modern radio clocks use the GPS satellite positioning system to provide more accurate time than can be obtained from these terrestrial radio stations. These GPS clocks combine time estimates from multiple satellite atomic clocks with error estimates maintained by a network of ground stations. Because they compute the time and position simultaneously from readings from several sources, GPS clocks can automatically compensate for line-of-sight delay and many radio propagation defects, and can achieve sub-microsecond accuracy under ideal conditions.
However, GPS clocks are dependent on the goodwill of the United States for the operation of the GPS satellite constellation. This is not acceptable for many critical non-US civilian and military systems, although it may be acceptable for many civilian purposes, as it is assumed by most users that the civilian GPS signal would not be switched off except in the event of a global crisis of unprecedented proportions.
The planned establishment of the Galileo positioning system by the EU (expected to be fully operational in 2008) is intended to provide a second source of time for GPS-compatible clocks that are also equipped to receive and decode the Galileo signals.
See also:
Search Encyclopedia
|
Featured Article
|