Encyclopedia > Flash synchronization

  Article Content

Flash synchronization

In a camera, flash synchronization is required for the firing of a photographic flash to coincide with the shutter admitting light to the photographic film.

The synchronization mechanism usually consists of an electrical contact within the shutter mechanism. The electrical connection will be either by means of a cable with a standardised coaxial connector, or via contacts in an accessory mount bracket.

X synchronization is when the timing of the contact coincides exactly with the full opening of the shutter. This is required for Xenon flash. Note that due to their construction, focal plane shutters[?] as used on most SLRs will only allow Xenon flash units to be used at shutter speeds were the entire film is open at once, typically at shutter speeds of 1/60 (sometimes 1/125) or slower.

For, now archaic, flash bulbs, the contact may need to close earlier to allow the shutter to open at the moment of full light intensity. Special long duration flash bulbs allowed bulb flash to be used with focal plane shutters at any speed. The Nikon F offered three different bulb synchronizations, in addition to the X.

The first camera to implement a flash synchronizer was the Exakta, in 1935.

All Wikipedia text is available under the terms of the GNU Free Documentation License

  Search Encyclopedia

Search over one million articles, find something about almost anything!
  Featured Article
Class Warfare

... It was first published in the UK by Pluto Press[?] in 1996. The contents runs as follows: Introduction Looking Ahead: Tenth Anniversary Interview (a ...

This page was created in 26.7 ms