Claymore mine

The M18 Claymore antipersonnel mine is a type of mine often used by the United States armed forces. The Claymore is designed to fire metal balls out to about 100 meters across a 60 degree arc in front of the device, which stands just off the ground. It is designed primarily to be used in ambushes and as an anti-infiltration device against enemy infantry, however it is also of some use against soft-skinned vehicles.

The M18 is based on the Misznay-Schardin effect, the behaviour of sheets of explosive that was independantly discovered in WWII by Misznay, a Hungarian, and Schardin, a German. When explosive detonates in contact with a metal object, the explosion is primarily directed away from the metal. Schardin spent some time developing the device as a side-attack anti-tank weapon, but development was incomplete at the end of the war.

Following the massed Chinese attacks during the Korean War, the US Army developed the German design into an anti-personnel device that would fire hundreds of small ball-bearings in one shot. The rear of the device was a steel sheet covered with the explosive, and in front was an air space packed with the shot. When the explosive detonates the majority of the force is directed forward, sending the balls out the front at high velocity. Claymores were not buried like other mines but were placed above ground pointed towards the likely location of the enemy.

As developed for the Vietnam War, the mine had an plastic olive casing with the words "Front Toward Enemy" on it. It was 21.5 centimeters (eight inches) long, 8 centimeters (three inches) high, and 3.5 centimeters (inch and a half) deep with two sets of little legs. Inside is 650 grams of plastic explosive and 700 steel ball-bearings. The mine could be either fired on command using a hand held device or detonated by trip wire.

The M18A1 was standardized in 1960, and replaced the M18 antipersonnel mine. Both mines are similar in appearance and functioning. The M18A1 mine is equipped with a fixed plastic slit-type sight (knife-edge sight on later model), adjustable legs, and two detonator wells. The mine and all its accessories are carried in the M7 bandoleer. An instruction sheet for the M18A1 is attached to the inside cover of the bandoleer.

When detonated, the M18A1 mine delivers spherical steel fragments over a 60° fan-shaped pattern that is two meters high and 50 meters wide at a range of 50 meters. These fragments are moderately effective up to a range of 100 meters and can travel up to 250 meters forward of the mine. The optimum effective range (the range at which the most desirable balance is achieved between lethality and area coverage) is 50 meters.