AN/USQ-17

The machine was the size and shape of a bathtub, about four feet high, with a hinged lid for access.

However shortly after completing the design, Cray left to join Control Data Corporation. So when the Navy awarded Sperry Rand a $50 million contract to build the AN/USQ-17, the loss of the engineers that understood the machine forced Sperry to redesign the entire machine from scratch (retaining the instruction set so that programs developed for the original machine would still run on the new one). As part of the redesign it was decided to improve access, and the second version was designed to stand upright, like an old fashioned double-door refrigerator, about six feet tall. This new design was designated the AN/USQ-20.

Instructions were represented as 30 bit words, in the following format:

   f  6 bits   function code 
   j  3 bits   jump condition designator 
   k  3 bits   partial word designator 
   b  3 bits   which index register to use 
   y  15 bits  operand address in memory

Numbers were represented as 30 bit words, this allowed for five 6 bit alphanumeric characters per word.

The main memory was 32,768 words of core memory.

The available registers were:

• one 30 bit arithmetic (A) register.
• a contiguous 30 bit Q register (total of 60 bits for the result of multiplication or the dividend in division).
• seven 15 bit index (B) registers.

The instruction format defined for the AN/USQ-17 marked the beginning of an instruction set which would be carried on, with many changes along the way, into later UNIVAC computers including the UNIVAC 1100/2200 series which is still in use today.

External Link

• The Univac M-460 Computer (http://ed-thelen.org/comp-hist/UNIVAC-M-640)