Encyclopedia > Amperage

  Article Content

Current

Redirected from Amperage

In electricity, current is any flow of charge, usually through a metal wire or some other electrical conductor. Conventional current was defined early in the history of electrical science as a flow of positive charge, although we now know that, in the case of metallic conduction, current is caused by a flow of negatively charged electrons in the opposite direction. Despite this understanding, the original definition of conventional current still stands. The symbol typically used for the amount of current (the amount of charge flowing per unit of time) is I, and the SI unit of electrical current is the ampere. Electric current is therefore also informally referred to as amperage, by analogy with the term voltage.

Current density is the current per unit (cross-sectional) area.

In metallic conductors, such as wires, currents are caused by a flow of electrons (negatively charged particles), but this is not case in most non-metallic conductors. Electric currents in electrolytes are flows of electrically charged atoms (ions), which exist in both positive and negative varieties. For example, an electrochemical cell may be constructed with salt water (a solution of sodium chloride) on one side of a membrane and pure water on the other. The membrane lets the positive sodium ions pass, but not the negative chlorine ions, so a net current results. Electric currents in plasma are flows of electrons as well as positive and negative ions. In water ice and in certain solid electrolytes, flowing protons constitute the electric current.

There are also instances where the electrons are the charge that is physically moving, but where it makes more sense to think of the current as the positive "holes" (the spots that should have an electron to make the conductor neutral) as being what moves. This is the case in a p-type semiconductor.

See electrical conduction for more information on the physical mechanism of current flow in materials.

Mathematically, current is defined as the net flux through an area. Thus:

φ = j·A

where A is the area through which the current is flowing, φ is the current, and j is called the "current density". The current density is defined as:

<math>
j=\int_i n_i \cdot x_i \cdot \mathbf{u_i} </math>

where n is the particle density (number of particles per unit volume), u is the average velocity of of the particles in each volume, and x can be mass, charge, or any other characteristic whose flow one would like to measure.

Every electric current produces a magnetic field. The magnetic field can be visualized as a pattern of circular field lines surrounding the wire.

Electric current can be directly measured with a galvanometer, but this method involves breaking the circuit, which is sometimes inconvenient. Current can also be measured without breaking the circuit by detecting the magnetic field it creates. Devices used for this include Hall effect sensors, current clamps[?] and Rogowski coils.

Ohm's Law predicts the current in an (ideal) resistor to be the quotient of applied voltage over electrical resistance.

Non-electrical currents (flow of mass) The initial idea for electrical currents is derived from the flow, or current, of fluids, especially water in a river. In a river or stream, the water is influenced by gravity, and flows downhill to reduce its potential energy. In the open ocean, currents are also driven by gravity, but in this case the motion is caused by the differing densities of bodies of water at different temperatures: warmer water is less dense and tends to float, while cooler water is denser and tends to sink.



All Wikipedia text is available under the terms of the GNU Free Documentation License

 
  Search Encyclopedia

Search over one million articles, find something about almost anything!
 
 
  
  Featured Article
Indian reservation

... Reservations in the United States (incomplete} Quinault Indian Reservation[?] Colville Indian Reservation[?] Spokane Indian Reservation[?] Yakim ...

 
 
 
This page was created in 44.4 ms